[App_rpt-users] Squelch issue with RTCM and Kenwood

Hi James, As Lee said, load Chuck squelch and see how it goes. I had similar issues with mine (although I'm running the VOTER board). The RSSI meter would jump around all over the place. I also had to find a suitable location for the discriminator on my radio. In my case the pin labelled "discriminator" had some high pass filtering applied. The delay seems inherent in the RTCM/voter. I've tested over a LAN with a latency of <1ms and I still hear the last syllable of my last word when unkeying. This is with the RX buffer set at 120ms and the TX buffer at 60ms (so is that 180ms total). There must be over a half second delay elsewhere within the processing of audio that is added? Hayden