Bryan, Not Defined? I would put a definition in there as it is probably using a default since nothing has been defined.(guessing from what you said). I have never not defined them to know for sure. Just copy the [telemetry] section from one of your other nodes and use it. ...mike/kb8jnm
I've defined a local node (902) for testing my 902 MHz repeater. It's on PCIRADIO/1 and it's up and going on the test box.
When I link it over to my node 40821, (224.28) it works come up and the repeater audio works as intended. However when using the 40821 node (ie input on 222.68) it has a courtesy tone added in only when the local node is linked. This tone is 6 fast beeps at 1800 hz (give or take what audacity says).
I can't find it defined in my rpt.conf at all. I've really run out of ideas here, and think I might be going insane.
I have audio of it up here http://keekles.org/~w9cr/40821%20wierd%20tone.wav
Anyone have any ideas?
-- Bryan Fields
727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.