It most likely means that your COS is active or your using DSP for the squelch and it's too loose. -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Kris Kirkland Sent: Thursday, January 27, 2011 12:00 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] CTCSS Problem Howdy First I'd like to start off by saying thanks for such a great piece of software for asterisk, I've been using Asterisk for 6 years now. I'm a network engineer so I'm not a repeater guru by any means, but I'm having a problem with my setup using the URI Model: DMK URI My first problem is; if ctcssfrom is set to anything but dsp, the repeater keys up as soon as asterisk is started. I can even disconnect everything but PTT and Ground and it still keys up as soon as its started. I did this to eliminate the possibility of the device sensing CTCSS via the mic_in_ac. So my understanding was that if I set ctcssfrom=no then it would ignore ctcss, but it still keys up. Is this a bug in the software being that it happens even with everything but ptt/gnd is disconnected? -- ______________________ Kris Kirkland ~ K5KRK ______________________ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users