See chan_alsaradio and the beaglebone GPIO. I've got a couple boards that I need to compile a driver for. Best regards William On Tue, Jan 8, 2019, 5:41 PM Carl Makin <carl@stagecraft.cx wrote:
Hi Bryan,
On 9 Jan 2019, at 5:32 am, Bryan Fields <Bryan@bryanfields.net> wrote:
Our hardware guy wants to use the OrangePi Zero as each repeater node and I’ve got Asterisk installed via the Allstarlink repo as per the FAQ on
On 1/8/19 5:39 AM, Carl Makin wrote: the
wiki and Asterisk is running (on Armbian Stretch).
It the Pi Zero likely doesn't have the CPU to run much, it's why it's not suggested as hardware.
It’s the OrangePI Zero, not RaspberryPi Zero. It’s a 1.2Ghz Allwinner H2+ (A7 Quad core) with 512MB RAM. It’s pretty close to a RaspberryPI 2 I think.
Regarding the sound, it uses the sunxi sound system, not the Broadcom one, but I’m certainly going to have to investigate it further to see if it will work.
Looking through Github, the channel driver for the Beagleboard looks much like what I want so I might have a play with that.
Thanks!
Carl. (vk1kcm)
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.