Johnathan, I have successfully used the BBB with a hub (Belkin F4U040) and two DMK's. It works but it is pushing the envelope a bit both in using the hub and also two nodes. It might work for you and then again it might not. BBB's are cheap so a better idea might be to just run one BBB per node. You just need to setup another server, move you second node there and set the server iax address at allstarlink.org and the second BBB and you Internet router. This would also have the added redundancy of another independent server. Hopefully we will get the BBB GPIO setup for PTT/COS and then you can use any compatible usb sound FOB. Then the cost of each node will be on the order of $60 or so. 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Mon, 12 May 2014 11:00:59 -0400 From: jonathan.weirmeir@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] USB hubs with BB Black? Good morning. I seem to remember seeing posts recommending not using USB hubs. However, the BeagleBone Black only has one USB host connector. I'd like to use two URIx's with the BB Black. Any suggestions? 73 DE KC8RYW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.