Why a service monitor? A deviation meter wont do it? -----Original Message----- From: Tim Sawyer Sent: 20 Feb 2013 03:59:07 GMT To: app_rpt-users@ohnosec.org list,Benjamin L. Naber Subject: Re: [App_rpt-users] [Bulk] App_rpt Install for Dummies You know, that's so true. It's really important for you (or a friend) to have a service monitor and the knowledge to use it properly. App_rpt makes setting up a node so much easier and accurate than any of the other VoIP technologies, which is one of the reasons app_rpt sounds so good, but you still have to know what your are doing. My "App_rpt Install for Dummies" focused on the computer setup and assumes you're a radio wiz. -- Tim :wq On Feb 19, 2013, at 5:28 PM, Benjamin L. Naber <benjamin@kb9lfz.com> wrote:
One must not forget to become a friendly ham and ask for training from someone or ham club that has one, on how to *properly* use a service monitor to tune their allstar node setups.
While there is an alternative way, I really don't recommend it if they are going to have a community of users.
~Benjamin, KB9LFZ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users