I have had this problem before. If I wait a few minutes then it works. Not sure why it cant open the device sometimes. Lee -----Original Message----- From: Benjamin L. Naber <Benjamin@kb9lfz.com> To: Tim Sawyer <tim.sawyer@mac.com> Cc: app_rpt mailing list <app_rpt-users@ohnosec.org> Sent: Tue, Nov 19, 2013 5:42 pm Subject: Re: [App_rpt-users] radio-tune-menu error with fake usbradio_tune_usb29572.conf in place... [Nov 19 17:39:59] NOTICE[1500]: app_rpt.c:22002 rpt_master: RPT thread restarted on 29572 [Nov 19 17:39:59] WARNING[1500]: app_rpt.c:22014 rpt_master: rpt_thread restarted on node 29572 [Nov 19 17:39:59] WARNING[1544]: channel.c:3051 ast_request: No channel type registered for 'Zap' rpt:Sorry unable to obtain pseudo channel [Nov 19 17:39:59] WARNING[1545]: chan_usbradio.c:1728 hidthread: Loaded parameters from usbradio_tune_usb29572.conf for device usb29572 On Tue, 2013-11-19 at 16:37 -0800, Tim Sawyer wrote:
There is no console messages if you do 'asterisk -rvvv’? Is that what you mean by log output? -- Tim :wq
On Nov 19, 2013, at 3:56 PM, Benjamin L. Naber <benjamin@kb9lfz.com> wrote:
Fail.
Very frustrating with no log output.
The settings on this machine are identical to my working node that uses the Limey Linux for Intel.
Mind you, I've made zero changes to rpt.conf. Only to usbradio.conf, and that was to the node designation, which it is now back to what it was after downloading the configs from the portal
There are a few of you that do not have anything helpful. If you are tempted to saying anything useful, save the electrons.
~Benjamin, KB9LFZ Working limely linux i686 allstar node 28569
my NOT working node RPT.conf:
; Radio Repeater configuration file (for use with app_rpt) ;
; ; Your Repeater ;
[29572] ; Change this to your assigned node number
rxchannel=Radio/usb29572 duplex=1 erxgain=-3 etxgain=3 ;controlstates=controlstates scheduler=schedule29572 morse=morse29572 macro=macro29572 functions=functions29572 phone_functions=functions29572 link_functions=functions29572 telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iKB9LFZ accountcode=RADIO hangtime=100 althangtime=100 totime=170000 idtime=540000 politeid=3000
idtalkover=|iKB9LFZ unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 ;nolocallinkct=0 ;eannmode=1 ;connpgm=yourconnectprogram ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct=0 ;holdofftelem=0 beaconing=0 ; ; *** Status Reporting *** ; ; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org ; depending on whether you are running ACID or Limey Linux.
; ** For ACID *** ;statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
; ** For Limey Linux ** statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
; ; Morse code parameters, these are common to all repeaters. ;
[morse29572]
speed=18 frequency=800 amplitude=4096 idfrequency=750 idamplitude=1024
[schedule29572]
;dtmf_function = m h dom mon dow ; ala cron, star is implied
[functions29572] 1=ilink,1 2=ilink,2 3=ilink,3 4=ilink,4 5=macro,1 70=ilink,5 71=ilink,6 72=ilink,7 73=ilink,15 74=ilink,16 75=ilink,8
80=status,1 81=status,2
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up 0=autopatchdn ; Autopatch down
;989=cop,4 980=status,3 99=cop,6
; Place command macros here
[macro29572]
;[29567] ; Change this to your assigned node number
;rxchannel=Radio/usb29567 ;duplex=1 ;erxgain=-3 ;etxgain=3 ;controlstates=controlstates ;scheduler=schedule29567 ;morse=morse29567 ;macro=macro29567 ;functions=functions29567 ;phone_functions=functions29567 ;link_functions=functions29567 ;telemetry=telemetry ;wait_times=wait-times ;context = radio ;callerid = "Repeater" <0000000000> ;idrecording = |iKB9LFZ ;accountcode=RADIO ;hangtime=100 ;althangtime=100 ;totime=170000 ;idtime=540000 ;politeid=3000
;idtalkover=|iKB9LFZ ;unlinkedct=ct2 ;remotect=ct3 ;linkunkeyct=ct8 ;nolocallinkct=0 ;eannmode=1 ;connpgm=yourconnectprogram ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 ;nounkeyct=0 ;holdofftelem=0 ;beaconing=0 ; ; *** Status Reporting *** ; ; Uncomment the either group following two statpost lines to report the status of your node to stats.allstarlink.org ; depending on whether you are running ACID or Limey Linux.
; ** For ACID *** ;statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
; ** For Limey Linux ** ;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
; ; Morse code parameters, these are common to all repeaters. ;
;[morse29567]
;speed=18 ;frequency=800 ;amplitude=4096 ;idfrequency=750 ;idamplitude=1024
;[schedule29567]
;dtmf_function = m h dom mon dow ; ala cron, star is implied
;[functions29567] ;1=ilink,1 ;2=ilink,2 ;3=ilink,3 ;4=ilink,4 ;5=macro,1 ;70=ilink,5 ;71=ilink,6 ;72=ilink,7 ;73=ilink,15 ;74=ilink,16 ;75=ilink,8
;80=status,1 ;81=status,2
;6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up ;0=autopatchdn ; Autopatch down
;989=cop,4 ;980=status,3 99=cop,6
; Place command macros here
;[macro29567]
;[telemetry]
;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048) ;ct2=|t(660,880,150,2048) ;ct3=|t(440,0,150,4096) ;ct4=|t(550,0,150,2048) ;ct5=|t(660,0,150,2048) ;ct6=|t(880,0,150,2048) ;ct7=|t(660,440,150,2048) ;ct8=|t(700,1100,150,2048) ;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000); ;remotemon=|t(1209,0,50,2048) ;cmdmode=|t(900,903,200,2048) ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048) ;patchup=rpt/callproceeding ;patchdown=rpt/callterminated
; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ;
;[wait-times]
;telemwait=2000 ;idwait=500 ;unkeywait=2000 ;calltermwait=2000
; ; This is where you define your nodes which cam be connected to. ;
[nodes] ; Note, if you are using automatic update for allstar link nodes, ; no allstar link nodes should be defined here. Only place a definition ; for your locak nodes, and private (off of allstar link) nodes here.
29572 = radio@127.0.0.1/29572,NONE ;29567 = radio@127.0.0.1/29567,NONE
; Memories for remote bases
[memory]
;00 = 146.580,100.0,m ;01 = 147.030,103.5,m+t ;02 = 147.240,103.5,m+t ;03 = 147.765,79.7,m-t ;04 = 146.460,100.0,m ;05 = 146.550,100.0,m
#includeifexists custom/rpt.conf
**** 29567 usbradio.conf*****
; ; Usbradio channel driver Configuration File ;
[general]
[usb29567]
hdwtype=0 rxboost=1 txboost=0 rxctcssrelax=1 txctcssdefault=100.0 rxctcssfreqs=127.3 txctcssfreqs=127.3 ;rxctcssoverride=0 carrierfrom=dsp ctcssfrom=dsp rxdemod=flat txprelim=no txlimonly=no txtoctype=no txmixa=voice txmixb=no invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=0
;[usb29572]
;hdwtype=0 ;rxboost=1 ;txboost=1 ;rxctcssrelax=1 ;txctcssdefault=100.0 ;rxctcssfreqs=100.0 ;txctcssfreqs=100.0 ;rxctcssoverride=0 ;carrierfrom=dsp ;ctcssfrom=dsp ;rxdemod=flat ;txprelim=yes ;txlimonly=no ;txtoctype=notone ;txmixa=composite ;txmixb=0 ;invertptt=0 ;duplex=1 ;rxondelay=0 ;rxnoisefiltype=0 ;eeprom=0 //
; external paralle port pin usage pp3 = ptt pp4 = out0 ; aux 1 pp5 = out1 ; aux 2 pp6 = out2 ; aux 3 ; pp11 = cor
#includeifexists custom/usbradio.conf
********** zapata.conf *******
; ; zapata.conf for systems with radiopci cards ;
[channels]
signalling=em_txrx ; This needs to match the number of channels used in zapata.conf and rpt.conf ;channel = 1 ;channel = 2 ;channel = 3 ;channel = 4
group=9 channel=pseudo
; ; End of file ;
On Tue, 2013-11-19 at 13:36 -0800, Tim Sawyer wrote:
The portal config does add the node number, usb[nodenumber], to the config files like you said. But if you only have one usb device the [nodenumber] is not needed because usb by itself is unique. If your older node was configured by hand it’s likely to have only usb as the designation. Whatever the designation in the usb config is, it has to match the rxchannel= in the node stanza of rpt.conf.
Be aware there are two possible usb config files; simpleusb and usbradio. I looks like you are using usbradio but I thought I’d mention it just incase there is a stray simpleusb.conf file on your system somehow. -- Tim :wq
On Nov 19, 2013, at 12:41 PM, Benjamin L. Naber <benjamin@kb9lfz.com> wrote:
this is new to me.
Some things have changed. I have not had these errors when installed and setup my other two nodes in the first couple months of this year. I downloaded the configs from the portal, did the radio-tune-menu, and it went right to the menu on the other nodes.
On the new node, I get: Error parsing device parameters
I'm comparing the new node stuff versus the old, and the only thing different is the usb[nodenumber].
I did a lsusb, saw the device was plugged in, and same info as the other machine.
?????? ~Benjamin, K9LFZ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users