Hello group, I need help with a remote base setup using a Yaesu FT-817ND. I just setup a second node on my ACID box using an URIx for the remote base. Everything is working fine with tx audio, rx audio, COR and PTT. I am having issue with the CAT control. I connect from my UHF repeater node on the box using *3701 and try to issue remote base commands and the radio will not respond to CAT commands. Here is what I have in the rpt.conf [701] rxchannel = Radio/usb701 ; Rx audio/signaling channel remote = ft897 ; Radio Type functions = functions701 ; Function list from link phone_functions = functions701 ; Function list from phone ioport = /dev/ttyUSB0 ; Serial port for control iospeed = 4800 dusbabek = yes authlevel = 0 ; Authorization level ;; authlevel = 0 : Anyone can use it ;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it ;; authlevel = 2 : Requires log in, asks for it automously ;mars = 0 ; set=1 for IC-706 w/MARS mods (optional) remote_inact_timeout=1800 ; Inactivity timer for remote base nodes only (set to 0 to disable). remote_timeout=5400 ; Session time out for remote base. (set to 0 to disable) ;remote_timeout=120 ; Session time out for remote base. (set to 0 to disable) ;remote_timeout_warning=30