allmon and allmon2 will cause an issue. if you do not use them you will not have the problem steve. it can be made to cause a crash every time when used. this is why i have taken the remote base node off the allmon2 page's on dial. and will have to do the same for the acid build also. i am working with dial to make the migration to new hardware sooner or later. ken n1dot On 12/12/2015 2:25 PM, Steve Zingman wrote:
I don't have any stability issues with the 706 and the basic rpt remote base code. I don't need hamlib. Admittedly, I don't use Aallmon in it. I'll have to try it.
YMMV
73, Steve N4IRS
On 12/12/2015 02:20 PM, David McGough wrote:
Hi Ken,
Interesting that having allmon2 probe the RB stats causes a Asterisk crash...Back in yesteryear I tried to run a 706mkiig RB using the built-in code and never had good results--YES, it did work. But, Asterisk wasn't stable very long, frequently crashing several times a day, depending on use. Various serial communications issues with the radio would -sporadically- "knock it for a loop" too. I concluded that their was probably memory getting clobbered somewhere.
If I disabled the RB command support, the Asterisk stability skyrocketed--uptimes now measured in weeks, months or longer. As an example, here are the stats from one of my RB systems now:
TX time today....................................: 01:12:27.95 TX time since system initialization..............: 87:37:42.861 Uptime...........................................: 1336:34:22
It has been up 55 days without any issues....And, as you can see, it gets used--But, I now use hamlib for all RB commands.
73, David KB4FXC
On Sat, 12 Dec 2015, Kenneth Grimard wrote:
the crash is caused when accessing the the remote base node using the asterisk manager interface via allmon2 by the way.
ken n1dot
On 12/12/2015 2:02 PM, Steve Zingman wrote:
Ken, I now better understand. I'll work on something that will solve the restart from crash. I will also look into what is causing the crash since I also have a 706 as a remote base.
Thanks, Steve
On 12/12/2015 01:50 PM, Kenneth Grimard wrote:
hi steve
the main issue steve is not the fact that service asterisk restart does not work.
but the main issue is that if asterisk crashes for any reason it will not restart itself. because of this i also can not use cop,1 cop command which is asterisk restart.
cop,1 will cause asterisk to exit for restart but asterisk will not restart via a watchdog script.
safe_asterisk used to do this very nicely but it has been eliminated. and you only use the asterisk service script under systemd.
yes the version of the asterisk service script i have here from the dial build from about 4 to 5 weeks ago the service asterisk restart does not work.
it force's me to use service asterisk stop to remove the asterisk.ctl file from the /var/run and the the service asterisk start will then work allowing asterisk to be restarted proprely.
I also have a node setup for remote base mode using an ic-706mkiig and sometimes that will cause a crash with it. when asterisk is accessed via an allmon2 dashboard.
I have had to take the remote base node off of the allmon2 page to stop this crashing.
it will do it every time too. that is something with the old remote base code with in app_rpt.c too which has never been fixed.
this is why the asterisk auto restart on crash would be very nice
where can i find a new or updated asterisk service script.
can i get it from the rpi2 dial image and put in the dial x86 build with out having to re-install dial x86 image?
otherwise for the most part asterisk under dial has been fairly stable. but i can make it crash under certain conditions which i try to avoid. like using allmon2 to access the remote base node via the asterisk manager interface.
ken n1dot
On 12/12/2015 1:01 PM, Steve Zingman wrote:
Ken, As I posted below I could not recreate your issue. is there anything I'm missing?
73, Steve
root@repeater:~# asterisk -r Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. =========================================================================
Connected to Asterisk 1519 currently running on repeater (pid = 4407) repeater*CLI> rpt cmd 2150 cop 1 2150 repeater*CLI> Killed
root@repeater:~# service asterisk restart root@repeater:~# asterisk -r Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. =========================================================================
Connected to Asterisk 1519 currently running on repeater (pid = 4462) repeater*CLI>
On 12/12/2015 11:50 AM, Kenneth Grimard wrote:
I download the dial release and installed it just after is first came out that was about 4 weeks ago.
now if asterisk crash for any reason or if you use the cop,1 cop command it will not restart is self at all. you have to go into an ssh shell and issue a service asterisk stop then a service asterisk start.
the service asterisk restart does not work for me on the x86 release.
there seems to be no way for asterisk to restart itself after a crash or after using the cop,1 cop command.
has there been any updates to the asterisk service command for systemd to fix this?
ken n1dot
On 12/12/2015 7:16 AM, Steve Zingman wrote:
Neil, I misread your message last night. I just tested service asterisk restart on DIAL x86 restarts a dead asterisk. See below.
root@repeater:/etc/init.d# ps ax | grep asterisk 1081 ? Ssl 0:01 /usr/sbin/asterisk 1117 pts/0 S+ 0:00 grep asterisk
root@repeater:/etc/init.d# kill -9 1081
root@repeater:/etc/init.d# ps ax | grep asterisk 1125 pts/0 S+ 0:00 grep asterisk
root@repeater:/etc/init.d# asterisk -r Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. =========================================================================
Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
root@repeater:/etc/init.d# service asterisk restart
root@repeater:/etc/init.d# ps ax | grep asterisk 1143 ? Ssl 0:00 /usr/sbin/asterisk 1171 pts/0 S+ 0:00 grep asterisk
root@repeater:/etc/init.d# asterisk -r Asterisk 1519, Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster@digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. =========================================================================
Connected to Asterisk 1519 currently running on repeater (pid = 1143) repeater*CLI>
73, Steve N4IRS
On 12/12/2015 12:44 AM, Neil k8it wrote:
Steve I have been evaluating Dial on a Linux PC Observations 1. When asterisk crashes, there is no restart or watchdog 2.this makes debugging very difficult 3.asterisk service mode restart does not seem to work 4. in this mode remote SSH to restart is not possible Do you have any fixes planned? Thanks 73 Neil Sablatzky K8IT Allstar Node 41838 KITLINK Allstar Node 42087 KITLINK HUB IRLP Node exp0068 Echolink K8IT-L WIRES-X K8IT 11479 Room 21479
_______________________________________________ . -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
This email has been sent from a virus-free computer protected by Avast. www.avast.com <https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic <https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
This email has been sent from a virus-free computer protected by Avast. www.avast.com <https://www.avast.com/?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus