3 Dec
2017
3 Dec
'17
2:52 a.m.
On 12/2/17 9:40 PM, Tim Sawyer wrote:
I haven't made it down to the site yet. Want to be on site in case It doesn't work and I have to use the serial port.
Tim, I've done a procedure here and verified it worked. 1. set the RTCM to full duplex and save/reset. 2. set the switch to full duplex speed 10 I've done this remotely two times now and it's worked without fail. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net