x86 for me... RPi's will eventually happen, but not right now... -Joe KA3NAM On Mon, Apr 4, 2016 at 6:15 PM, Steve Zingman <szingman@msgstor.com> wrote:
I also run all my servers headless. The RPi2 has ttyAMA0 enable at boot. On the x86 machines, I'll look into it for the next rev.
On 04/04/2016 06:04 PM, Bryan Fields wrote:
Would it be possible to get the DIAL install to enable serial console during install and after installation?
I run all my systems headless and actually had an issue finding a monitor yesterday to install on a non server hardware lacking IPMI/iLO. Serial would be a nice to have on ttyS0, 115200n8 by default.
Thoughts?
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.