Thanks all for the help, problem was resolved. Aloha Wayne KH6XP wooddragonsmall From: kk6ecm [mailto:kk6ecm@gmail.com] Sent: Friday 3:59 PM To: 'wg'; app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Simleusb.conf question I may be misunderstanding your first issue, but... it is my understanding that simpleusb relies on the ctcss being set in the radio, not the node. http://ohnosec.org/drupal/node/193 Also, there is a DSP throughput delay for up to a second (seems to vary on our repeater) which can be heard if one unkeys too quickly after speaking. Thanks, Bob kk6ecm _____ From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of wg Sent: Friday, October 09, 2015 6:46 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Simleusb.conf question Hi, This maybe a repost or question posed before and I think I saw something somewhere but can't find it. I have two nodes experiencing this issue since I changed to simpleusb with the dmk URI. Both nodes have the ctcss tones ENC/DEC set on them and at the radio works fine. Thru the node I can key them up without sending the tone, the radio doesn't hear anything of course but the node repeats without the tone. I've gone thru all documentation I can find and can't seem to solve the problem. Another issue is on the repeater when you unkey you can hear the last second of your transmission, I've seen this somewhere before but can't find it again. Any insight would be helpful. Thanks to all of you who keep this going, Aloha Wayne KH6XP wooddragonsmall _____ <https://www.avast.com/antivirus> Avast logo This email has been checked for viruses by Avast antivirus software. www.avast.com <https://www.avast.com/antivirus> --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
