Verbosity was 0 and is now 3 [Aug 30 19:59:55] NOTICE[655]: app_rpt.c:22032 rpt_master: RPT thread restarted on 1901 [Aug 30 19:59:55] WARNING[655]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 1901 -- Re-Loading config for repeater 1901 -- rpt (Rx) initiating call to Radio/usb on Radio/usb == Set device 1-1.2:1.0 to usb [Aug 30 19:59:55] WARNING[693]: chan_usbradio.c:1744 hidthread: File usbradio_tune_usb.conf not found, device usb using default parameters. xxxxxxx*CLI> Disconnected from Asterisk server Executing last minute cleanups -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Wednesday, August 30, 2017 7:55 PM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] RAT_rc1 on Pi3 a no joy rename usbradio_tune_usb.conf to usbradio_tune_usb.conf.save and see what happens. Check modules.conf for only the proper channel driver loaded. Steve On 08/30/2017 10:50 PM, Bob wrote:
Bob here, not out of the woods quite yet.
I'm replacing a private node computer with a RPi3. I've started with copying over the /etc/asterisk/*.conf files. Asterisk is crashing on me at regular intervals. Here are the errors I'm receiving. Each time the message "--Re-loadign config for repeater..." occurs seems to correspond with the green light going solid instead of pulsing.
Any ideas are appreciated.
Thanks, Bob
Verbosity was 0 and is now 3 [Aug 30 19:43:52] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread restarted on 1901 [Aug 30 19:43:52] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 1901 -- Re-Loading config for repeater 1901 -- rpt (Rx) initiating call to Radio/usb on Radio/usb == Set device 1-1.2:1.0 to usb [Aug 30 19:43:52] WARNING[794]: chan_usbradio.c:1743 hidthread: Loaded parameter s from usbradio_tune_usb.conf for device usb . [Aug 30 19:43:54] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread restarted on 1901 [Aug 30 19:43:54] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 1901 -- Re-Loading config for repeater 1901 -- rpt (Rx) initiating call to Radio/usb on Radio/usb == Set device 1-1.2:1.0 to usb [Aug 30 19:43:54] WARNING[796]: chan_usbradio.c:1743 hidthread: Loaded parameter s from usbradio_tune_usb.conf for device usb . [Aug 30 19:43:56] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread restarted on 1901 [Aug 30 19:43:56] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 1901 -- Re-Loading config for repeater 1901 -- rpt (Rx) initiating call to Radio/usb on Radio/usb == Set device 1-1.2:1.0 to usb [Aug 30 19:43:56] WARNING[798]: chan_usbradio.c:1743 hidthread: Loaded parameter s from usbradio_tune_usb.conf for device usb . [Aug 30 19:43:58] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread restarted on 1901 [Aug 30 19:43:58] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 1901 -- Re-Loading config for repeater 1901 -- rpt (Rx) initiating call to Radio/usb on Radio/usb == Set device 1-1.2:1.0 to usb [Aug 30 19:43:58] WARNING[800]: chan_usbradio.c:1743 hidthread: Loaded parameter s from usbradio_tune_usb.conf for device usb . [Aug 30 19:44:00] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread restarted on 1901 [Aug 30 19:44:00] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 1901 -- Re-Loading config for repeater 1901 -- rpt (Rx) initiating call to Radio/usb on Radio/usb == Set device 1-1.2:1.0 to usb [Aug 30 19:44:00] WARNING[802]: chan_usbradio.c:1743 hidthread: Loaded parameter s from usbradio_tune_usb.conf for device usb . [Aug 30 19:44:02] ERROR[764]: app_rpt.c:22027 rpt_master: Continual RPT thread restarts, killing Asterisk
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Wednesday, August 30, 2017 8:12 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] RAT_rc1 on Pi3 a no joy
Oh what a surprise, a PS issue with a Pi. ;) do the following as root: touch /etc/asterisk/firsttime firsttime
Or, if all you want to do is set the TZ. dpkg-reconfigure tzdata
On 8/30/2017 11:08 AM, Bob Pyke wrote:
Powersupply (sigh!!!)
Asterisk is happy. Is ther a first time script for setting up time zone or is this manual? Thanks, Bob
Sent from my iPhone
On Aug 30, 2017, at 5:50 AM, Steve Zingman <szingman@msgstor.com> wrote:
We have not had any reports of crashing on a RPI3 I have a test node built on a RPI3 that I use to verify proper operation. The ssh file is at /etc/ssh/sshd_config
73, Steve N4IRS
On 8/30/2017 8:45 AM, Bob Pyke wrote: Not able to get past the Linux continual crashing and rebooting. The experience is quite similar on two RPi3s. It does not crash on an RPi2, which has allowed me to poke around this build a bit. I can't locate the ssh file for edit. This build does not seem to follow the docs.Allstarlink website for file name and location. The original RPi build seems to work on both variants of RPi.
Thanks, Bob
Sent from my iPhone
On Aug 29, 2017, at 9:42 PM, Bryan Fields <Bryan@bryanfields.net> wrote: On 8/30/17 12:41 AM, Bob Pyke wrote: Asterisk does not start. What do the logs say? Can you run asterisk in the foreground and see what it outputs as errors?
-- Bryan Fields
727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.