Hi Steve Very well put, I didn’t know there were two different platforms and i will set up the other platform as well. I do hope going forward the two can work this out. Sorry if I caused unnecessary non sense for my lack of knowledge. 73, 75 Joe K2OL Sent from my iPhone
On Mar 31, 2019, at 8:00 PM, Steve L <kb9mwr@gmail.com> wrote:
What would be very beneficial to all is when you post a question on any list (be it Allstar or whatever); is to identify and share as much as you can in terms of software you are running as well as hardware.
Example: ASL 1.01 Raspbian Stretch Image on a Raspberry Pi 2b Interface: DMK USB URI Radio: Motorola Maxtrac Issue: Choppy Transmit audio
Since there are multiple combinations of software and hardware, folks really need to elaborate. No one is a mind reader. It would help if you are running the hamvoip image to post the question to their list at: http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Since there are a number of differences between the distros and the fact theirs is closed, one cannot even begin to really guess at what the issues might be as as you cannot see what is different at a code level even if you share as much detail about your configs.
In my opinion each can have its place (one for more experienced users which to be able to roll their own/experiment and one for fairly new to Linux), however I would rather at some point see the two groups work together again. Till such a time users just need to realize what they are running, and who to go to for support, else it just creates a guessing game and further hostility.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.