Hi, I got the thing right, this time I guess. The basic concept of app_rpt is: To provide VOIP as a channel of communication to remote distances where Radio Signals cannot reach, but VOIP can. Normally we use Repeaters and Remote Bases but using Internet is cost effective and is an alternative. After all it's for Amateur Radio's so special equipment is needed and interfaced to the PC, there by, getting the Radio Internet signals interchanged. Now in my application all I need to do is conference call at all frequencies, between computers. No where I need a transceiver to do the call. So no repeater controllers needed, no Remote Base Nodes needed. I think this simple scenario can be done with, Asterisk Conference Configuration. If I need to configure frequencies, the channels of Asterisk can be used. Means channels dedicated to all frequencies. Later If I needed to telecast, from computer to repeater, or Base Station, or radio Station, there I might need app_rpt. Thanks for your time and help. On 1/15/10, Babar Abbas <abbas.babar@gmail.com> wrote:
Hi, I am a software engineer. Needed to simulate Amature Radio over VOIP. Below are my inquiries.
My understanding of app_rpt, is
Links Base Nodes, with other Base Nodes, with VOIP. Links Repeaters with Base Nodes, VOIP.
I am not a hardware engineer, ok, so the repeater to Linux interface might need some hardware. So app_rpt manages that??? Same is for Base Nodes???
What is my problem here?
I have to build a system where users communicate through their microphone head set, to the other receivers/transmitters (also on the computer), like emulating an Amateur Radio environment, through VOIP. Different users on different frequencies, all communicating with each other, Linked through a server like Asterisk. A typical VOIP conference call, though we have to provide frequencies like Amateur radio.
Now the above problem can be done with Asterisk. But since app_rpt is for specially Amateur Radio environments, how can I use the functionality provided by app_rpt.
app_rpt links the Base Nodes/Repeaters would it be useful as a server for managing users at their frequencies communicating, adding it's extra capability of linking nodes.
I don't need the hardware support from this module, as I am using just a microphone head set.
Any replies will be greatly appreciated. I have already been through a lot of research to reach to Asterisk first, then a client, then app_rpt. And the app_rpt site is very hardcore technical stuff.
-- Regards, Babar Abbas.
-- Regards, Babar Abbas.