Hey, isn’t there a mute switch on those? I’ve got about 10 of them here now. But anyway, with the LED’s plus up/down/mute buttons exposed, that would sure make things pretty straightforward, no? Maybe? I wish I was smart. On Mar 22, 2014, at 2:54 PM, Eric Guth <eric@efratnetworks.com> wrote:
I just received 8 of the "blob fobs" for $.99 each. Is there anyone working on assigning the PTT to one of the LEDs on the fob?
73,
Eric 4Z1UG / WA6IGR Allstar Node: 28422
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Wright Sent: Saturday, March 08, 2014 5:32 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] USB FOB options
Ok I can confirm that de-blobbing this CM119 chip is a no-go. Heat gun removed the blob no worries, but removed (or destroyed) everything else as well. Might be a good option if you wanted to desolder the entire board which it did famously, but removing the blob also removed the chip and after that of course the computer wouldn't recognise the device. $3.50 down the flusher, oh well!
Steve
-- Meshnetworks - Rangitaiki Plains Rural Broadband Internet Providers +64 21 040 5067 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.