Dave, Good to know. Thanks for the correction. -- Tim :wq On Apr 20, 2014, at 10:01 PM, David McGough <kb4fxc@inttek.net> wrote:
Tim,
app_rpt can't do STE on receive since that is a transmitter function. But, chan_usbradio does provide a means to chop off the squelch tail using an audio delay. This is exactly how it's done on most stand-alone analog controllers these days.
See the parameter: rxsquelchdelay in the usbradio.conf file.
I can confirm this does work, I use it on several Kenwood repeaters. Note that you must use flat audio (rxdemod=flat) for rxsquelchdelay to work, since the "flat" setting turns on most of the DSP code. Setting rxsquelchdelay=150 will solve most squelch crash issues, in my experience.
73, David KB4FXC
On Sun, 20 Apr 2014, Tim Sawyer wrote:
Simpleusb has nothing to do with RTCMs. You should not have a simpleusb.conf on your system if your only interface is a RTCM.
When you have set the RTCM COR type = 1 the squelch tail comes from your radio, or rather the Doug Hall voter in your case. As far as I know there is no STE setting anywhere in app_rpt or any of it’s channel drivers including chan_voter.
Have you considered connecting RTCMs to your receivers and let them vote in place of the Doug Hall?
-- Tim :wq
On Apr 20, 2014, at 12:53 PM, Sam Nabkey <sam.nabkey@gmail.com> wrote:
Hello all...
I have replaced a repeater controller with a RTCM and a server.
All is well but for a heavy squelch tail after carrier drop. I am using the unit in simple mode because I do not have an active discriminator output because I am using the RTCM behind a Doug Hall voter.
I have Googled the subject to death and I see plenty of mentioned items regarding simpleusb and usb settings but nothing on voter configuration. Am I missing something someplace?
Thanks in advance for all the information.
You all are some of the smartest folks I know.
Sam K8SN
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.