31 Mar
2013
31 Mar
'13
2:18 p.m.
Does not the 12 volt is for the output amplication ? Envoyé de mon iPad Le 31 Mar 2013 à 08:56, "Robert a. Poff" <wb3awj@comcast.net> a écrit :
I just found my notes on the MSR-2000 that I did for a friend a year or so ago.
Looks like I needed to run the discriminator (rx pin 5) through the amplifier in the URI. Also picked up +12vdc for the amp from the receiver connector.
Running fine with usbradio and using the DSP.
Bob WB3AWJ Allstar 27784 -- Sent from my Android phone with K-9 Mail. Please excuse my brevity.