Have you updated your RTCM to the latest firmware from SVN<http://svn.ohnosec.org/viewvc/projects/allstar/voter/?root=svn>? Are you setup to compile your own firmware? On Mon, Jan 27, 2014 at 8:43 PM, 41.2 Jim <41.2jim@gmail.com> wrote:
Question.... is their anything that is universal to both Stanzas, "usbradio.conf & voter.conf" that can be used with an RTCM like say .... rxsquelchdelay=xx or rxondelay=xx as I am tring to rid my repeater of a low signal squelch tail while using a PL board(TS-64 in decode only) and with the RTCM providing squelch, A kerchunk will get a long squelch tail ???... was not an issue with the URIx and DSP have the squelch at 7 turns past minimum gating and still get a long crash ??
Thank you all, in advance, for your time
Jim Frederick KF6QBW 446.600- 100.0 PL Repeater AllStar Node # 28839 Skype = jim41.2
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.