Josh, I have not tried it with the port. Some things I can think of to check: do you have /dev/parport0 try setting invertptt = 1 Does the transmitter key? as soon as asterisk starts? Steve On 02/15/2016 09:12 PM, Josh W4ZZK wrote:
Evening all
Would appreciate a little insight to an issue here. Perhaps this is very simple.
Have the DIAL box pretty much "good to go" with the USB FOB, cabling from a M120 Motorola, within the hood of a DB25 is a 4n33 Opto for keying the rig with PP2 (and using PP10 as COR).
To test some abilities, I've gotten Echolink enabled on the node, and have RX audio from the radio through the computer to echolink, as well as over the phone to the Portal. This part seems to be just fine. Unfortunately, the computer is not sending signal to TX. I have "simpleusb.conf" configured with:
pp2=ptt pp10=cor
Have I missed something simple in addressing the machine to use pp2 and pp10 for rig control, rather than USB FOBs onboard points?
Again, this is new... bear with me as I learn the ropes!
Thanks! Josh, W4ZZK
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic