Outside the obvious... ..One connection per Internet IP ..Proper port forwarding for udp 5198 & 5199 (if you are on a dhcp, your ip may have changed) ..changing echolink servers in set-up I wouldn't have a clue ;) ...mike/kb8jnm
Just setup a new node (42928) using DIAL on a RPi which is registering on both the Allstar and Echolink (518309) sites, showing up as valid on all lists. The repeater works fine with radio calls, and incoming Allstarlink node connections, but not from Echolink. CLI> indicates successful reception from the Echolink servers... no errors or warnings of any type in CLI>. The node just does not see any incoming contacts from Echolink. Any ideas?
By the way, simpleusb has way too much audio delay... hear whole words after unkeying. Whereas it's not as noticable using usbradio.
Thanks, Bob kk6ecm
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.