Jim, how would one bind a second IP address to the different echolink nodes? I have zero intention of adding bad audio to my node, but real curious where that would get configured. Thanks GeorgeC W2DB 2360 ----- Original Message ----- From: Jim Duuuude To: tom ; app_rpt mailing list Sent: Sunday, September 22, 2013 10:33 AM Subject: Re: [App_rpt-users] AllStar Echolink chan_echolink is MORE then capable of running as many echolink nodes as you want, as long as your server has MULTIPLE public IP addresses. Since IP networking is MORE then capable of allowing multiple IP addresses on a single interface, we certainly did not want to limit users' ability to take advantage of this characteristic (unlike any other echolink implementation that I am aware of). Jim WB6NIL ------------------------------------------------------------------------------ From: k5tra@austin.rr.com To: app_rpt-users@ohnosec.org Date: Sun, 22 Sep 2013 10:09:45 -0500 Subject: [App_rpt-users] AllStar Echolink Anton, You cannot run a second EchoLink node from the same IP address. Each requires a separate IP and must use a different call (like KC2RQR-R and KC2RQR-L). There is one way around the IP problem on a windows client by using a proxy server for one of the nodes. I don’t know how to run EchoLink through a proxy from Allstar. Tom / k5TRA _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users