25 Mar
2016
25 Mar
'16
5:46 a.m.
On 3/21/16 10:57 PM, Bryan Fields wrote:
I revised my interface diagram, and added a poorly drawn schematic.
http://keekles.org/~w9cr/Quantar%20to%20Quad%20PCI%20card.pdf I've updated this again, as I was getting two ID's, one from the station and one from the controller. I setup a second channel with an ID and logic to switch to it during P25, and back to the first no-id channel during analog. An example codeplug with working wireline is presented for your use. The schematic was redrawn by a friend of mine to be a bit more professional looking. 73's -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net