Assuming you are using the BBB or RPi2 image from hamvoip.org configuration at allstarlink.org has nothing to do with echolink configuration. You need to change the configuration(s) in /etc/asterisk/echolink.conf and restart asterisk. If you are switching between servers you also need to change your port forwarding to point to the new server. 73 Doug WA3DSP http://www.crompton.com/hamradio From: wb5nfc@gmail.com Date: Fri, 22 May 2015 13:35:32 -0500 To: App_rpt-users@ohnosec.org Subject: [App_rpt-users] Echolink Configuration Changes Not 'Sticking' on Allstar Portal I've been attempting to change Echolink access from one of my servers to another. Each time I do, it returns to the previous value. I've tried with both Chrome and Firefox Browsers. Logged in to the Allstar PortalSelected Server, Server Configuration (selected my RaspberryPi2 server)Selected Echolink SettingsSelected Echolink Node Number (41398)Selected the Dropdown for Allstar Node Number (27911) When I go back and check, Allstar Node Number is assigned to node 2347, not 27911. Have I missed a step along the way (or maybe two)? John WB5NFC _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.