Additionally, I should have mentioned this possibility to my last post... Not sure, but I think when you use the scheduler and issue commends through it, (like time announcements etc) it may trigger a count to the cos/key-ups. The reason I say that is in the software, I think the logical cos must be true to accept commends. But as I say, not sure. And I'm not sure it is all that important unless it's causing you a problem. ...mike/kb8jnm ----- Original Message ----- From: "Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org> To:<app_rpt-users@lists.allstarlink.org> Cc: Sent:Sat, 3 Mar 2018 21:56:23 -0500 Subject:[App_rpt-users] Question???? What if anything could cause your node to key up without you knowing about it? I check my node status and in 8 hours 15 mins. I have 285 keyups. Buy I happen to know that the node was only keyed up physically 15 times on that 8 hour window. So I don’t know where the 285 is coming from . So can a node key up without you knowing it?? If so where do I start looking for the problem . This has me confused. David Waters _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.