For a simplex node you must tell the usb fob or URI that you are connected to a simplex radio (not a full duplex radio like a repeater). Otherwise the moment it receives a signal it will attempt to key the same radio because it thinks it full duplex. So in usbradio.conf set duplex=0 for simplex radios. Also in rpt.conf you must tell App-rpt that you are running in half duplex node so you must state in the node stanza duplex=0. If you dont it will assume you are connected to a repeater. So I dont think its a bug it just needs to be configured correctly. Hope this helps. Jon VA3RQ
I don't understand something, and before I file this as a bug report on Mantis, I want to make sure that it is.
My current setup consists of a DMK URI, and an Icom UHF commercial radio running simplex. I have this parameter set in usbradio.conf:
duplex=0
If I set duplex=1, it will continually kerchunk. If I set it back to duplex=0, when the radio receives a signal, it will transmit.
Only by adding this to my node stanza in rpt.conf will it behave as expected:
duplex=1
Either I'm not understanding how this works, or I don't have something configured or implemented correctly, or it's a bug?
tnx Stephen K1LNX