Hi,
I have created an instructions set on how to modify a keyfob based on the 119 chip. These are basically just a different version of the original instructions. Hopefully having a second set will help in making modifications.
The lastest draft is located at http://m3h.com/usbfob-119.pdf. Feel free to copy and share around.
Please take a look and privide feedback.
It would be nice to see these instructions linked on the main hardware page as an alternative to the original instructions.
Mike _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
NICE JOB!! I especially liked your technique where you position the component to be soldered to pin #13 first with hot glue to hold it in place before actually soldering! I've been doing it the hard way ;-) I'll have to try this on my next one! Michigan Broadband Systems Inc. "Always Connected" (734)527-7150 Steve's cellphone: (734)904-1811 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.