Ok, figured it out. The GPS had a EEPROM error showing, rebooting it and waiting for a lock fixed the issue. Debug shows: DEBUG: TSIP: ok, 0, 9 - 14: 00 00 00 00 00 00 when everything's OK Cheers, Jesse On Tue, Feb 23, 2016 at 2:40 PM, Jesse Lloyd <ve7lyd@gmail.com> wrote:
Hi All,
I'm attempting to get an RTCM and Trimble Thunderbolt E to talk. I'm using TSIP for the connection.
Using debug level 14 I see "GPS Receiver Active, waiting for acquisition"
Using debug level of 40 I can see packets coming in "DEBUG: TSIP: ok, 0, 9 - 14: 00 00 04 00 00 00
When I use Trimbles software "TrimbleStudio" I can see that the GPS's mode is "3-D, Auto"; its Status is "doing position fixes"; its Almanac is "complete & current". I can see the Lat/Lon and Altitude updating, and 6 satellites are being used for a position fix. It's in monitor mode TSIP 9600 8N1.
I can't figure out why the Trimble software says everything is good, but the RTCM says the GPS is waiting for acquisition.
Any ideas? Is there a debug level in the RTCM that might provide more information?
Thanks,
Jesse