On 2/15/2017 4:18 PM, Angeo wrote:
Bob,
Thanks for the reply. As it turns out, the repeater COR is not working. So, using the option of the connections listed
below would not work.
I am wondering if anyone has been able to get this repeater to work with DSP instead of Simple USB mode?? This would be the ideal way to go for us.
I have a node (2302) using a VXR-7000 / DIAL on a X86 (PC) (not that it matters) using DSP on a URIx. I don't remember if I did anything special - but I don't think I did. I'm going to drive out to the site and document the wiring - not sure when I'll have the time, but maybe over the weekend - maybe before. I know that we continued to use the CTCSS generation in the VXR-7000 - as opposed to doing it in software. This way, we can depress the "Remote" switch (turning it off) and go back to in-cabinet controls if the computer, app_rpt, or the interface fails. I've uploaded the rpt and usbradio configuration files to this site: http://www.masterscommunications.com/temp/2302/ Kevin - W3KKC