Hi Ramesh, you may be seeing the same issue I have with multiple URIs on the RPI. this seems to be a problem when using USB radio on the RPI in the latest dial distro. I reported it Steve N4IRS but don't know if its been fixed or not. Perhaps you can do 2 RPI one per node for now. Jon RQ On 4/18/2017 10:22 AM, Ramesh Dhami wrote:
Hi Guys:
I am preparing a RPi3 to replace a dying PC with ACID at my repeater site. The Pi will control 2 full-duplex repeaters.
I have prepared the config files at home and plugged in 2 (modified) USB fobs. Both fobs worked initially... i.e., I was able to connect a test repeater to each fob and hear telem' data out of the repeater / corresponding to the applicable node #.
I am using usbradio for both fobs (config changed in modules.conf and rpt.conf)
The issue I have is that the LED on one of the fobs is no longer flashing and hence, no audio out of that fob. The LED is however, on permanently.
Here is the output of 'lsusb':
Bus 001 Device 005: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller Bus 001 Device 004: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter
It is the 2nd fob that seems to be non-responsive.
Any ideas folks?
I am reluctant to swap fobs between USB ports as I know that usb enumeration can be a pig!
Cheers,
Ramesh, VA3UV
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.