Ramon, There are two ways to play audio files, locally or globally. Most of the time you would want it to be locally. The commands in the client are rpt localplay and rpt playfile To play a file locally to your node assuming it was node 1999 you could execute the following rpt localplay 1999 myfilename or in Linux - asterisk -rx "rpt localplay 1999 myfilename" You do not use the extent when specifying the filename. myfilename.gsm becomes just myfilename The file has to be acceptable in samplerate and type to play. You can play or combine any of the sounds found in /var/lib/asterisk/sounds or create your own. In the BeagleBone Black image code I give an example of combining to create a node-id file. It is located in the local directory under /etc/asterisk. Here is an example - #! /bin/bash cat /var/lib/asterisk/sounds/letters/w.gsm /var/lib/asterisk/sounds/letters/a.gsm /var/lib/asterisk/sounds/digits/3.gsm /var/lib/asterisk/sounds/letters/d.gsm /var/lib/asterisk/sounds/letters/s.gsm /var/lib/asterisk/sounds/letters/p.gsm /var/lib/asterisk/sounds/repeater.gsm > /etc/asterisk/local/node-id.gsm If you execute this script one time it creates node-id.gsm. If you then play that file it will say WA3DSP repeater - in the Allison voice. Any like type sound file can be combined and played. asterisk -rx "localplay 1999 /etc/asterisk/local/node-id" The node-id would typically be specified in rpt.conf for the voice ID idrecording=/etc/asterisk/local/node-id 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Wed, 23 Jul 2014 22:43:56 -0400 From: kp4tr.ramon@gmail.com To: doug@crompton.com CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] additional- app_rpt_script_execution And for my next question...How can I play audio and text from the asterisk command line? I would like to assemble custom messages using the existing GSM files and add my own. Thanks.