Dude, put: 40968 = radio@192.168.20.1/40968,NONE in the [nodes] section of rpt.conf. Obviously, you have 2 app_rpt servers on the same LAN (behind the same NAT). This, and a line in the OTHER server's rpt.conf (that will allow connections the other way), is necessary in this type of configuration. Jim From: david@k0pwo.com To: app_rpt-users@ohnosec.org Date: Sat, 27 Dec 2014 18:09:13 -0700 Subject: [App_rpt-users] Error Message When Attempting to Connect to my hub I copied an error message I am getting on the CLI of my Hub Node when I attempt to connect from my Repeater Node. I have been unable to connect to any other nodes for a while. I am not sure what changed but suddenly I could not connect to anyone any more. I copied and pasted the error message below in hopes that someone could point me in the right direction in finding the problem. I am guessing it has something to do with my router or modem. I currently use a ASUS RT-AC68U router which is provided IP from a Comcast supplied modem/router that is bridged so that its only a modem. I also have a cisco switch that I plug all my hardware into. Any help would be greatly appreciated. Connected to Asterisk currently running on K0PWO_Hub (pid = 2372)Verbosity is at least 3 -- Accepting UNAUTHENTICATED call from 192.168.20.1: > requested format = gsm, > requested prefs = (gsm|g726aal2|ulaw), > actual format = g726aal2, > host prefs = (g726aal2|gsm), > priority = mine -- Executing [41488@radio-secure:1] Rpt("IAX2/192.168.20.1:4569-1947", "4148 8") in new stack[Dec 27 16:33:51] WARNING[2930]: app_rpt.c:22704 rpt_exec: Node 40968 IP 73.169. 7.203 does not match link IP 192.168.20.1!! == Spawn extension (radio-secure, 41488, 1) exited non-zero on 'IAX2/192.168.2 0.1:4569-1947' -- Hungup 'IAX2/192.168.20.1:4569-1947' David Dean, K0PWO Arapahoe County Colorado(720) 350-2053 cell(720) 207-9030 fax _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.