Oops....In my previous message I meant to say I'm using the command: *3(node number) to connect....See the functions table I'm using, below. 73, David KB4FXC ----------------------------------------------------------------------- ; function table ; [functions] 1=ilink,1 ; Specific link disconnect 2=ilink,2 ; Specific Link connect - monitor only 3=ilink,3 ; Specific Link connect - transceive 4=ilink,4 ; Enter command mode on a specific link 7=ilink,5 ; Link status 80=status,1 ; System info 81=status,2 ; Time 82=status,3 ; app_rpt.c Version 87=ilink,15 ; long range sensors ;6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up ;0=autopatchdn ; Autopatch down 99=cop,4 ; Test tone 98=cop,6 ; Phone TX key