Hmm. where is that?? The sample config file in the source kit says: ctcssfrom=dsp ; CTCSS Decoder Source ; Options = no,usb,dsp ; no - CTCSS decoding, system will be carrier squelch ; usb - CTCSS decoding using input from USB adapter ; usbinvert - same as above but inverted polarity. ; dsp - CTCSS decoding using RX audio in DSP. ; rxdemod option must be set to flat for this to work From: ke2n@cs.com To: telesistant@hotmail.com; kf4gta@amsat.org; app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Squelch Tail Date: Sat, 12 Feb 2011 07:37:20 -0500 Well – as I said, that is “my understanding”And my understanding comes from this section in the sample config file ctcssfrom=dsp ; no,usb,dsp ; no - CTCSS decoding, system will be carrier squelch ; usb - CTCSS decoding using input from USB FOB ; (currently not supported) ; dsp - CTCSS decoding using RX audio in DSP. ; rxdemod option must be set to flat for this to work. Ken From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Friday, February 11, 2011 10:59 PM To: ke2n@cs.com; kf4gta@amsat.org; app_rpt mailing list Subject: RE: [App_rpt-users] Squelch Tail what makes you think that??From: ke2n@cs.com To: kf4gta@amsat.org; app_rpt-users@ohnosec.org Date: Fri, 11 Feb 2011 19:59:07 -0500 Subject: Re: [App_rpt-users] Squelch TailI don’t know if it has any bearing on your problem but my understanding is that ctcssfrom=usb is not supported you need to use DSP or “no” Ken From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bobby Lacey Sent: Friday, February 11, 2011 7:39 PM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Squelch Tail I thought rxondelay=25 fixed the problem, but I connected up to another allstar node tonight and the ping pong effect started again. I also seem to have instances of audio dropping out when I'm listening over a link with my HT or mobile. If I listen to the audio through my SIP phone extension, it sounds fine. I'm running version 0.281 if that helps. Would there be anyone brave enough to help me tweak my system?Thanks for any advice & 73 BobbyKF4GTA On Fri, Feb 4, 2011 at 4:33 PM, Tim Sawyer <tim.sawyer@me.com> wrote:See if this helps... http://209.159.155.200/drupal/node/170 -- Tim :wq On Feb 4, 2011, at 8:53 AM, Bobby Lacey wrote:
Hi,
I am a newcomer to Allstar and have just set up my node this week. I had a few wrinkles that I was able to iron out in time by reading the archives, but I haven't been able to fix the following problem.
My node has a squelch tail that won't go away and seems to cycle constantly once it gets going. I'm using a URI to a Kenwood TM-D700a and my node is in simplex mode. I still think I may have bugs in my tuning area. My config is pasted below and I would love any help that anyone could provide. Thanks & 73.
Bobby KF4GTA
## rpt.conf ##
[27633] ; Change this to your assigned node number
rxchannel=Radio/usb27633 duplex=0 erxgain=-3 etxgain=3 ;controlstates=controlstates scheduler=schedule27633 morse=morse27633 macro=macro27633 functions=functions27633 phone_functions=functions27633 link_functions=functions27633 telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iKF4GTA accountcode=RADIO hangtime=100 althangtime=100 totime=170000 idtime=540000 politeid=3000
idtalkover=|iKF4GTA unlinkedct=ct2 remotect=ct3 linkunkeyct=ct8 ;nolocallinkct=0 ;eannmode=1 ;connpgm=yourconnectprogram ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct=0 ;holdofftelem=0 beaconing=0
## usbradio.conf ##
[general]
[usb27633]
hdwtype=0 rxboost=0 txboost=1 rxctcssrelax=1 txctcssdefault=100.0 rxctcssfreqs=100.0 txctcssfreqs=100.0 ;rxctcssoverride=0 carrierfrom=usb ctcssfrom=usb rxdemod=speaker txprelim=yes txlimonly=no txtoctype=notone txmixa=composite txmixb=no invertptt=0 duplex=0 rxondelay=0 rxnoisefiltype=0 eeprom=0
#includeifexists custom/usbradio.conf
## usbradio_tune_usb27633.conf ##
[usb27633] ; name=usb27633 ; devicenum=0 devstr=3-1 rxmixerset=1000 txmixaset=200 txmixbset=500 rxvoiceadj=0.149018 rxctcssadj=0.500000 txctcssadj=200 rxsquelchadj=1
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users