Finally got it to work… mostly. There was already a stanza for IP-Phone that I wound up using and it worked. The stanza I added looked just like it but wouldn’t work. Here is what I wound up with: From iax.conf [ip-phone] Works username=ip-phone type=friend context=myphone host=dynamic auth=md5 secret=password codecpriority=host disallow=all allow=g726aa12 allow=gsm transfer=no callerid="wr4jw" [myiphone] Does Not work username=myiphone type=friend context=myphone host=dynamic auth=md5 secret=passwd codecpriority=host disallow=all allow=ulaw allow=g726aal2 allow=gsm transfer=no callerid="wr4jw" From extensions.conf [myphone] exten => 41902,1,rpt(41902|P) The only thing I can’t get it to do is play the node number and say “Connected” when I connect. If I set it this way, nothing plays: [myphone] exten => 41902,1,rpt(41902|P) exten => 41902,1,answer() exten => 41902,n,Playback(rpt/node) exten => 41902,n,Playback(digits/4) exten => 41902,n,Playback(digits/1) exten => 41902,n,Playback(digits/9) exten => 41902,n,Playback(digits/0) exten => 41902,n,Playback(digits/2) exten => 41902,n,Playback(rpt/connected) If I set it this way it connects, plays “Node 4 1 9 0 2 Connected” and then disconnects. exten => 41902,1,answer() exten => 41902,n,Playback(rpt/node) exten => 41902,n,Playback(digits/4) exten => 41902,n,Playback(digits/1) exten => 41902,n,Playback(digits/9) exten => 41902,n,Playback(digits/0) exten => 41902,n,Playback(digits/2) exten => 41902,n,Playback(rpt/connected) exten => 41902,1,rpt(41902|P) Watching Asterisk I see: ==Auto fallthrough, channel ‘IAX2/ip-phone-475” status is unknown --Hangup “IAX2/ip-phone-475” Thanks in advance Jamey Wright WR4JW From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of W0OTM Sent: Wednesday, April 22, 2015 11:06 PM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Config for Zoiper Same results here too Have a fresh install of ACID [Apr 22 22:03:47] NOTICE[11258]: chan_iax2.c:6839 register_verify: No registration for peer 'w0otm' (from 172.22.1.2) #includeifexists custom/iax.conf [myiphone] username=w0otm type=friend context=myphone host=dynamic auth=md5 secret=xxxxxx disallow=all allow=ulaw allow=g726aal2 allow=gsm codecpriority=host transfer=no callerid=w0otm #includeifexists custom/extensions.conf [myphone] ;Settings for Zoiper exten => 27136,1,answer() ;Change the node number on all these lines to your own node exten => 27136,n,Playback(rpt/node) exten => 27136,n,Playback(digits/2) ; change the playback digits to your node as well exten => 27136,n,Playback(digits/7) exten => 27136,n,Playback(digits/1) exten => 27136,n,Playback(digits/3) exten => 27136,n,Playback(digits/6) exten => 27136,n,Playback(rpt/connected) exten => 27136,1,rpt(27136|Pv) ;CHANGE THE XXXXX TO YOUR NODE NUMBER On 4/22/2015 9:41 PM, Jamey Wright wrote: I did that. That is the tutorial I used. Jamey WR4JW ________________________________ From: Bob Prybyzerski [w2ymm1@gmail.com<mailto:w2ymm1@gmail.com>] Sent: Wednesday, April 22, 2015 9:39 PM To: Jamey Wright; app_rpt ALLSTAR Subject: Re: [App_rpt-users] Config for Zoiper You need to also make a modification to extensions.conf Additional tutorial can be found at : http://crompton.com/hamradio/BeagleBoneBlackAllstar/ConnectZoipertoAllstarNo... Sent from my iPhone Bob Prybyzerski W2YMM 631-960-1051 On Apr 22, 2015, at 10:20 PM, Jamey Wright <Jamey.Wright@morgan911.org<mailto:Jamey.Wright@morgan911.org>> wrote: I found the tutorial for using Zoiper on an iPhone for connecting to Allstar nodes written by Bernie, W1BFC. I followed it to the letter and my device won't register. In iax.conf I have: [myphone] username=user type=friend context=myphone host=dynamic auth=md5 secret=mypasswd codecpriority=host disallow=all allow=ulaw allow=g726aa12 allow=gsm transfer=no callerid="wr4jw" On the server after running asterisk -r i see the following; NOTICE[2952] : chan_iax2.c:6839 register_verify: No registration for peer 'user' (from x.x.x.x) What am I doing wrong here? Thanks Jamey WR4JW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Mashall Dias .-- ----- --- - -- Ottumwa, IA EN31ta 4SQRP #310