Actually, no.. It should be 4569. From: hotmail_97fc649978f54bf0@live.com [mailto:hotmail_97fc649978f54bf0@live.com] On Behalf Of Doug Crompton Sent: Sunday, August 31, 2014 12:35 PM To: Lu Vencl Cc: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] Registration Looks good here - 27976=radio@63.231.96.56:14569/27976,63.231.96.56 <mailto:27976=radio@63.231.96.56:14569/27976,63.231.96.56> I assume 14569 is what you want??? 73 Doug WA3DSP http://www.crompton.com/hamradio _____ From: vencl@att.net <mailto:vencl@att.net> To: app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> Date: Sun, 31 Aug 2014 12:03:19 -0400 Subject: Re: [App_rpt-users] Registration Ok, so here is the latest. I discovered that the port # (which I did change earlier) is not updating on the rpt_extnodes file. It still shows 14569. On the local node 27976, it does show the correct node port # as registered in the rpt_extnodes file, so I went ant took another one my nodes and try to see what it shows and it also shows the wrong port #. So I think there is something going on with the allstar server. Unless I am missing something here, I think this might require Jim or an admin to take a look? Or does this only update every few hours now? I thought it was like every 15 minutes or so? But I would have thought that upon registration, the file on the allstar server would update immediately and then all the nodes would grab the file every 15-30 minutes or so.. If someone could confirm. Thanks 27976=radio@63.231.96.56: <mailto:27976=radio@63.231.96.56:14569/27976,63.231.96.56> 14569/27976,63.231.96.56 Should be: 27976=radio@63.231.96.56:4569/27976,63.231.96.56 <mailto:27976=radio@63.231.96.56:4569/27976,63.231.96.56> On the affected now, 27976: asterisk -rx 'iax2 show registry'; ll /var/lib/asterisk Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 27976 63.231.96.56:4569 60 Registered Lu KA4EPS _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.