On 11/25/2010 07:29 AM, Peter Elke wrote:
Hi All,
After surveying all of the repeater sites, two of them are not good locations for direct internet access. The WISP is too slow or has way too much jitter.
As a plan B will be attempting a 420mhz full duplex backhaul link to an IP connected node.
On those "bad" sites we will be using app_rpt in a standalone mode as a local repeater controller.
Here is my cost saving question... Using one URI is there a way to use the right channel for node A (main repeater) and the left channel for node B (backhaul 420 link)? I can use a parallel port as needed for I/O if that is an issue...
Pete
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
That would have been a good idea except for one thing: There's only one microphone channel input on the CM108 chip, so it's not possible to run two radios from one URI. Steve WA6ZFT