Forgive the nativity, but what is the point of ASL nodes being hosted on a VPS? For a hub node I understand, and do so myself. However, there is a growing number of hub nodes that do not do anything. I understand a public hosted hub node is great for connecting to with the web transceiver and phone portal, but I sure hope this is not going to become the norm. We have a few guys that come onto our system that only use their phone, and honestly, I wish they would use a radio instead. For the principle of the matter, but also, phones have terrible audio and tend to pick up noise that needs not broadcasting. ~Benjamin, KB9LFZ On Fri, 2018-04-06 at 20:28 -0400, Steve Zingman wrote:
You are going to have to figure out how to get the proper kernel headers for your running kernel. One possibility to check is either run aptitude and check if you have any pending upgrades, and if so, is one of them a kernel upgrade. Pretty much the same thin by running apt-get dist-upgrade. Without the proper kernel headers, DAHDI will not build. You do not have to "make" it. once you have the proper kernel headers, you can reinstall dahdi with apt-get install -- reinstall asl-dahdi-linux-dkms
On 04/06/2018 08:22 PM, Monty wrote:
Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-headers-2.6.32-042stab127.2 E: Couldn't find any package by glob 'linux-headers-2.6.32- 042stab127.2' E: Couldn't find any package by regex 'linux-headers-2.6.32- 042stab127.2'
Monty
On Fri, Apr 6, 2018 at 5:10 PM, Steve Zingman <szingman@msgstor.com
wrote: Without the proper kernel header, you can't build DAHDI. What is the result of "apt-get install linux-headers-`uname -r` -y"
On 04/06/2018 08:05 PM, Monty wrote:
Error from make command: "You do not appear to have the sources for the 2.6.32-042stab127.2 kernel installed" (Sorry I didn't highlight in the initial email.)
I have tried this command, per the Readme of Dahdi: make KVERS=4.9.0-6-amd64
I do not get any errors, then run:
make install KVERS=4.9.0-6-amd64
I get "DADHI installed successfully", reboot, and I still get the same error messages in the CLI I listed below.
Monty
On Fri, Apr 6, 2018 at 4:23 PM, Steve Zingman <szingman@msgstor .com> wrote:
What error did you get?
On 04/06/2018 07:15 PM, Monty wrote:
Hello All,
I'm trying to install the allstarlink package on my Debian VPS. I followed the instructions on the wiki:
cd /tmp wget https://github.com/AllStarLink/Asterisk/raw/develop/al lstar/repository/install-repository chmod +x install-repository ./install-repository
If Raspbian: apt-get install raspberrypi-kernel-headers -y
Otherwise: apt-get install linux-headers-`uname -r` -y
apt-get update apt-get install allstarlink -y I did get an error on the linux-headers command. I installed what I believe is the latest headers from apt-get (4.9.0-6-amd64).
Asterisk is not able to run, and I'm getting the following messages in the CLI when I run asterisk manually:
[Apr 6 16:05:35] WARNING[14976]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 28615 [Apr 6 16:05:35] WARNING[15001]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Apr 6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory
Seems to be dahdi is missing. Any ideas how to remedy?
I have tried to recompile Dahdi from:
http://wiki.allstarlink.org/wiki/DAHDI_Make
After running the "make" command I get the following:
"You do not appear to have the sources for the 2.6.32- 042stab127.2 kernel installed."
I can't seem to find how to update/install 2.6.32- 042stab127.2 kernel.
Monty KE7JVX
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_r pt-users
To unsubscribe from this list please visit http://lists.all starlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt -users
To unsubscribe from this list please visit http://lists.allst arlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-u sers
To unsubscribe from this list please visit http://lists.allstar link.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-use rs
To unsubscribe from this list please visit http://lists.allstarli nk.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink .org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.o rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.