my untrained asterisk eye leads me to believe that your issue lies here: [radio-secure] exten => 2345,1,Answer exten => 2345,n,Playback(tt-weasels,skip) exten => 2345,n,Hangup This tells me to answer, playback a sound and then hang up the connection, and your log confirms this: *CLI> [Aug 14 11:45:36] NOTICE[16779]: chan_echolink.c:2189 do_new_call: new CALL=W0IOU,ip=204.13.148.184,name= Todd -- Executing [2345@radio-secure:1] Answer("echolink/el0-12", "") in new stack -- Executing [2345@radio-secure:2] Playback("echolink/el0-12", "tt-weasels|skip") in new stack -- <echolink/el0-12> Playing 'tt-weasels' (language '') -- Executing [2345@radio-secure:3] Hangup("echolink/el0-12", "") in new stack == Spawn extension (radio-secure, 2345, 3) exited non-zero on 'echolink/el0-12' I am running things the old way, but the ACID manual should cover you here as well: [el0] confmode=no call=WU7Q-R pwd=password name=WU7Q-Repeater qth=Sacramento-CA email=email-addr maxstns=20 rtcptimeout=10 node=3590 recfile=/tmp/recorded.gsm astnode=2194 context=echolink-in server1=server1.echolink.org server2=server2.echolink.org server3=server3.echolink.org extensions.conf [echolink-in] ;exten => ${ECHOLINK}/3001083,1,hangup ;exten => ${ECHOLINK}/3021507,1,hangup ;exten => ${ECHOLINK}/3111234,1,hangup ;exten => ${ECHOLINK}/3208345,1,hangup exten => ${ECHOLINK}/3066432,1,Rpt,${NODE} exten => ${ECHOLINK}/3009875,1,Rpt,${NODE} exten => ${ECHOLINK}/3083598,1,Rpt,${NODE} exten => ${ECHOLINK}/3127901,1,Rpt,${NODE} exten => ${ECHOLINK}/3009865,1,Rpt,${NODE} exten => ${ECHOLINK}/3214691,1,Rpt,${NODE} exten => ${ECHOLINK}/3302333,1,Rpt,${NODE} exten => ${ECHOLINK}/3005539,1,Rpt,${NODE} exten => ${ECHOLINK}/_3XXXXXX,1,hangup This was the old way to do access control on echolink nodes, this particular setup only allows connections from known users and then disconnects everyone else. Again, not the preferred method (see the ACID manual), but it works for us. Jim, K6JWN On Fri, Aug 14, 2009 at 11:47 AM, Todd Birkenholtz <birkey@gmail.com> wrote:
Thanks Jim I will change my rpt.conf to rxchannel = Zap/pseudo
Any Idea on why no audio in my inbound Echolink connections?
My echolink inbound connection looks like this.
In extensions.conf
[radio-secure] exten => 2345,1,Answer exten => 2345,n,Playback(tt-weasels,skip) exten => 2345,n,Hangup
*CLI> [Aug 14 11:45:36] NOTICE[16779]: chan_echolink.c:2189 do_new_call: new CALL=W0IOU,ip=204.13.148.184,name= Todd -- Executing [2345@radio-secure:1] Answer("echolink/el0-12", "") in new stack -- Executing [2345@radio-secure:2] Playback("echolink/el0-12", "tt-weasels|skip") in new stack -- <echolink/el0-12> Playing 'tt-weasels' (language '') -- Executing [2345@radio-secure:3] Hangup("echolink/el0-12", "") in new stack == Spawn extension (radio-secure, 2345, 3) exited non-zero on 'echolink/el0-12'
Thanks
On Fri, Aug 14, 2009 at 12:58 PM, Steve Zingman <szingman@msgstor.com>wrote:
Todd Birkenholtz wrote:
Fellow Hams and PBX tinkerer's
I want to provide a auto-patch and a repeater dial-in for our club repeater using my existing home Asterisk PBX in a Flash setup. Our club repeater is connected to Echolink so I was thinking about creating a Echolink node on my server that users could link to then I would allow an outbound call. On the reverse I would like to provide a repeater dial-in number that would route through my Asterisk server to our club's node via Echolink. Keeping in mind at no time does my Asterisk server actually communicates with a radio directly it is just acting as a Echolink gateway.
I have been experimenting with ACID but it appears the radio/usb driver is preventing Asterisk from loading without a actual usb radio connected. If I noload=chan_usbradio in the modules.conf file then Asterisk appears to load but I am still having problems with refrence to it in my rpt.config file.
I have been able to configure a Echolink connection but I cant send audio to the connected node when the remote station connects but the Asterisk debug indicates it is. Does anybody have a working Echolink node that they would like to share their iax,echolink,rpt and extensions config file with me.
Todd, Set rxchannel = Zap/pseudo in place chan_usb in rpt.conf You will not need the hardware.
73, Steve N4IRS _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- Jim Nessen K6JWN Email: nessenj@jimsoffice.org | Ph: 530.564.0039 IRLP: Node 3598 | Echolink: 83598 K6JWN-R | AllStar: Node 2165