Do a “tcpdump port 4569” at the Linux command line and incite a connect from another node. You should see inbound packets. I have seen ISP’s block port 4569 but not FiOS. I’m on FiOS with an actiontek router and it works fine. -- Tim :wq On Jan 10, 2014, at 7:41 PM, Doug Crompton <doug@crompton.com> wrote:
I am remotely trying to troubleshoot a friends new Allstar installation. I can ssh in and connect out to nodes but I cannot connect in to the system from external nodes. Port 4569 is forwarded.
I discovered this link -
http://www.voip-info.org/wiki/view/IAX
about consistent NAT and I was wondering if that might be the problem.
I was able to connect in one time right after a reboot which might support the NAT issue.
The router is an Actiontek MI424WR GigE as supplied by Verizon on their FIOS system.
Is anyone else having a problem with this router or have any ideas on this?
Nothing is logged at the server or shows up in the client on the system which kind of points to a routing failure.
Is there a good way to check for open port 4569 as I don't think normal port scan programs will check this.
73 Doug WA3DSP http://www.crompton.com/hamradio _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users