Do you use tone for the audio? is ot controled by app_rpt or the repeater itself? I dont think it would be the repeater, cause it would interfere witht the dstar protion of the system.. Did you do something else then just that hardware? did you had to change a lot of setting inside the repeater? lots of question, cause I did took a look at the shematic before, and was not able to set the audio level with usbradio..
Date: Sun, 29 Mar 2015 11:01:49 -0400 From: Ramesh@va3uv.com To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] signal level good enough for a URI-X?
On 29/03/2015 10:55 AM, pete M wrote:
what not a single answer... wow..
<-- Hi Pierre: A picture is worth a thousand words..... you have my schematic for my dual mode (DV / FM) MUX, which shows the exact pin-out for the DB25 on the TKR 750/850.
So there you go - now you have a schematic and a few words :)
Bon Chance!
Salut,
Ramesh. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.