That’s correct. Link status telemetry always propagates to all connected nodes. But it’s digital and out of band, not in the audio stream. So the individual node operator can decide whether to always hear it (telemdefault=1), never hear it (telemdefault=0) or hear it only after a locally issued link command (telemdefault=2) plus a short time period. Almond gets it's list of connected nodes through an AMI (Asterisk Manager Interface) command which is similar to the *CLI> rpt lstats <node> command. So yes, you can get a list of nodes with lstats and connected nodes would not hear anything. If you wanted to hear that on your repeater, I suppose one could write a script using lstats to dump the list to a text file, parse it and then use localplay. -- Tim :wq
On May 17, 2015, at 7:38 AM, mike@midnighteng.com wrote:
Tim,
That may well stop local telemetry, but I believe that the question is to stop it (the query responce) from propagating to connected systems.
I don't think there is a way to do that. It is in the IAX stream of connected stations.
It is up to the local node owner to limit playback of what telemetry is played on their local node from what is propagated across the connected network. You can only set your node.
If I am wrong on this, please, someone chime in because that is my understanding of it. And based on how I have played with it, it works that way.
I don't know if you can query your system on a command line for connected systems "without triggering the same". Perhaps you can. If you can, then you have the ability to email/text that to the outside. So if you can query on a command line without propagating the info, you might be able to script it and give that a command for "local playback only" by just reading the text piped output or just count how many stations are connected (statistics) etc.
I don't run/query my nodes from a command line much, just the OS. So I am not aware of the differences "if any".
This question has come up many times before. Not sure if anyone has had a work around. It would seem to me that there should be a work around because allmon can get a list without triggering list query propagation. So that's a start.
...mike/kb8jnm
Perhaps telemdefault=2 will do what you want. http://docs.allstarlink.org/drupal/node/128 <http://docs.allstarlink.org/drupal/node/128>
-- Tim :wq
On May 17, 2015, at 4:26 AM, Skyler F <electricity440@gmail.com> wrote:
Is there a way to announce the system wide status only local so it does not play on others repeaters with telemetry enabled?
Skyler KDÃWHB
-- Skyler Fennell amsatnet.info <http://amsatnet.info/> KDÃWHB electricity440@gmail.com <mailto:electricity440@gmail.com>_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit%2
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.