David, Not sure why you are getting the error. Lets go further. Worst case, you have to reload the image. verify you have dahdi-linux-complete-current.tar.gz in /srv/download if not: cd /srv/download wget https://github.com/N4IRS/AllStar/raw/master/dahdi-linux-complete-current.tar... cd /usr/src/astsrc-1.4.23-pre rm -rf dahdi-linux-complete tar zxvf /srv/download/dahdi-linux-complete-current.tar.gz mv dahdi-linux-complete* dahdi-linux-complete /srv/scripts/build_dahdi.sh Steve On 01/09/2016 09:59 AM, David Osborn wrote:
Thank you so much for the swift response, Steve. That's really appreciated. Unfortunately it's still in the wars :-(
root@pi_repeater:/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete# make clean make -C linux clean make[1]: Entering directory '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux' make -C drivers/dahdi/firmware clean make[2]: Entering directory '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/firmwar e' rm -f dahdi-fw-*.o make[2]: Leaving directory '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/firmwar e' make -C M='/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/oct61 2x' clean make[2]: Entering directory '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux' make[2]: *** M=/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux/drivers/dahdi/oct612 x: No such file or directory. Stop. make[2]: Leaving directory '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux' Makefile:179: recipe for target 'clean' failed make[1]: *** [clean] Error 2 make[1]: Leaving directory '/usr/src/astsrc-1.4.23-pre/dahdi-linux-complete/linux' Makefile:14: recipe for target 'clean' failed make: *** [clean] Error 2
I fell at the first hurdle. The directory oct612x does exist, however, and it contains files.
Any thoughts?
-----Original Message----- From: Steve Zingman [mailto:szingman@msgstor.com] Sent: 09 January 2016 14:51 To: David Osborn; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Dial on RPi - recompile after updates
David, cd /usr/src/astsrc-1.4.23-pre/dahdi-linux-complete make clean make all make install make config
73, Steve N4IRS
On 01/09/2016 09:46 AM, David Osborn wrote:
Hi all,
I downloaded and installed the DIAL image for the RPi2 and it went in a treat. Great work guys!
What I did next broke it, but it is something that we all have to do and I've done it many times with my Acid installs: I did an update to the system.
Just as with Acid, the updates broke Asterisk and it craps out after a few tries:
[Jan 9 14:34:48] WARNING[300] chan_dahdi.c: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jan 9 14:34:48] ERROR[300] chan_dahdi.c: Unable to dup channel: No such file or directory [Jan 9 14:34:48] WARNING[301] chan_simpleusb.c: File simpleusb_tune_usb.conf not found, device usb using default parameters. [Jan 9 14:34:50] ERROR[269] app_rpt.c: Continual RPT thread restarts, killing Asterisk
I am guessing that Asterisk etc needs to be re-compiled. How do I go about this? I tried running the rpi2 install script at https://github.com/N4IRS/AllStar and answered "n" to repeated queries about patches. Compilation appeared to succeed, but Asterisk still dies on me. Thanks again for the work on this. I'm most impressed with the RPI2!
David Osborn GD4HOZ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic