dusbabek = yes is a hack for syntor xcat. You should not have it for other radios. I suggest removing dusbabek. The symptoms you describe indicate the serial port is not working for whatever reason. Have you scoped the serial port to see if valid data is coming out? -- Tim :wq On Feb 20, 2012, at 11:58 AM, K&R Yoksh wrote:
Hello,
I've been struggling to find information about the remote base capability of app_rpt. I am positive that app_rpt is able to talk to the radio, but I can't seem to control the radio otherwise.
When I connect to the remote base node (2214), I hear the message "invalid frequency". If the radio is in Memory mode, it will switch to VFO A, but the frequency and mode are not changed.
I have not had much luck even learning the command syntax. I have read that a Remote base node will not respond to DTMF commands, so I have been issuing the DTMF commands to the connected node instead (rpt fun 2211 *717).
Google found some information for me, but this function also doesn't work when issued from connected node 2211:
Set freq. VFO MMMMM*KKK*O (Mhz digits, Khz digits, Offset) enter a freq like 443.675 + as *1443*675*1 (or 2 or 3)
Of course, I realize that the 706 has limitations with it's CI-v command set. PTT and changing power levels, for example, cannot be done via CI-v. I've been using CI-v to auto-tune my Icom rigs for satellite work for years.
I'd really like to get this working, and will post a how-to article on my web site once this is working.
Many thanks for any info. 73
Kyle K0KN
--- snippet from rpt.conf ---
; Remote Base authlevel=0 ; authlevel=0 Disables all access control ; authlevel=1 Enables access control, and waits for ; key up before prompting for the access code ; authlevel=2 Enables access control, and prompts for the ; access code at the time of connection
;functions=functions-remote remote=ic706 ; Icom 706 remote base ioport=/dev/ttyS0 ; serial port for CAT/CI-v data iospeed=19200 ; COM port speed dusbabek = yes ; wtf is this? serial port will not work without it memory=memory phone_functions=functions-remote ;mars = 0 ; set=1 for IC-706 w/MARS mods (optional) civaddr=72 ; address should be in decimal, not Hex as Icom uses. Icom ; hex 58=decimal 88. hex 48=decimal 72 split2m = 600 split70cm = 5000 duplex=0 remote_inact_timeout=0 ; Specifies the amount of time without keying from the link. Set to 0 to disable
remote_timeout=0 ; Session time out for remote base. Set to 0 to disable. remote_timeout_warning= remote_timeout_freq=
[functions-remote] 0=remote,1 ; Retrieve Memory 1=remote,2 ; Set freq. VFO MMMMM*KKK*O (Mhz digits, Khz digits, Offset) ; enter a freq like 443.675 + as *1443*675*1 (or 2 or 3) 2=remote,3 ; Set tx PL tone HHH*D* 3=remote,4 ; Set rx PL tone HHH*D* 40=remote,100 ; Rx PL off 41=remote,101 ; Rx PL on 42=remote,102 ; Tx PL off 43=remote,103 ; Tx PL on 44=remote,104 ; Low Power 45=remote,105 ; Medium Power 46=remote,106 ; High Power 711=remote,107 ; Bump -20 714=remote,108 ; Bump -100 717=remote,109 ; Bump -500 713=remote,110 ; Bump +20 716=remote,111 ; Bump +100 719=remote,112 ; Bump +500 721=remote,113 ; Scan - slow 724=remote,114 ; Scan - quick 727=remote,115 ; Scan - fast 723=remote,116 ; Scan + slow 726=remote,117 ; Scan + quick 729=remote,118 ; Scan + fast 79=remote,119 ; Tune (brief AM transmission for automatic antenna tuner) 51=remote,5 ; Long status query 52=remote,140 ; Short status query 67=remote,210 ; Send a * 69=remote,211 ; Send a # ; 91=remote,99,CALLSIGN,LICENSETAG ; Remote base login.
; Define a different dtmf sequence for each user which is ; authorized to use the remote base to control access to it. ; For examble 9139583=remote,99,WB6NIL,G would grant access to ; the remote base and announce WB6NIL as being logged in. ; Another entry, 9148351=remote,99,WA6ZFT,E would grant access to ; the remote base and announce WA6ZFT as being logged in. ; When the remote base is disconnected from the originating node, the ; user will be logged out. The LICENSETAG parameter can be optionally specified ; to enforce TX band limits.
;98=cop,6 ; Remote base telephone key
[txlimits] ; ; TX limits allow TX priveleges to be assigned to a particular license class. ; In the example below, voice priveleges are assigned for US ham ; licensees for 40 meters through 10 meters. ; Each line contains a LICENSETAG defined in a user log in command, ; an =, then a set of band limit ranges. Up to 40 ranges per entry may be defined. ; T = 28.300-28.500 G = 7.175-7.300,14.225-14.300,18.110-18.168,21.275-21.450,24.930-24.990,28.300-29.700 A = 7.125-7.300,14.175-14.300,18.110-18.168,21.225-21.450,24.930-24.990,28.300-29.700 E = 7.125-7.300,14.150-14.300,18.110-18.168,21.200-21.450,24.930-24.990,28.300-29.700
[memory] ; Memories for remote bases ; ;Syntax : CC=RRR.RRR,PPP.P,AAAAA ; C=Channel Number ; R=RX Frequency ; P=PL Frequency ; A=Attributes ; ;Attributes : a=AM b=LSB f=FM u=USB ; l=Low Power m=Medium Power h=High Power ; -=Minus TX Offset s=Simplex +=Plus TX Offset ; t=TX PL on r=RX PL on ; init=147.540,000.0,fs ;Set to this on startup ;init=147.540,123.0,shrt ;Set to this on startup ;init=147.540,s,f ;Set to this on startup ;00=145.510,123.0,sh ;01=145.530,123.0,sh ; 00 = 146.580,100.0,m ; 01 = 147.030,103.5,m+t ;02 = 147.240,103.5,m+t ;03 = 147.765,79.7,m-t ;04 = 146.460,100.0,m ;05 = 146.550,100.0,m
[nodes] 2214 = radio@127.0.0.1/2214,NONE,y ; remote base definition
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users