Why not program the SCOM to use an inverted PTT signal and program the usbradio.conf to use an inverted signal for PTT. That should deal with the re-boot issue. Keith On 9/18/13 4:00 PM, "Corey Badgley" <kc7mrq@bresnan.net> wrote:
I have an URI on port three of an SCOM 7330 controller. Everything works perfectly unless power goes out and the node server reboots. The URI keys the controller while the computer boots and stays keyed until one of the following occurs:
1. Audio from another node is received. 2. Telemetry is broadcasted. ( I usually have telemetry turned off) 3. Send a command to un-key the PTT. 4. Enter echo mode within radio-tune-menu and my audio is rebroadcasted.
Is there a way to toggle the URI PTT upon a reboot or start-up to ensure its logic is in the correct state?
Have a good day,
Corey _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA