On 12/22/19 10:00 PM, Rob S wrote:
I've setup ASL and built a cm108 usb fob with COS and PTT for a simplex node. Radio->ASL works great. The audio is clear and it can decode DTMF. ASL->Radio doesn't work. Even when connecting headphones directly to the fob I do not hear any audio in either channel.
The strange bit is that PTT and audio both work if I choose (F)lash in simpleusb-tune-menu. My radio transmits the test tones just fine. Audio also comes through if I shut down Asterisk and play a couple .wav files through the fob using aplay while manually holding PTT.
For some reason ASL just won't send audio out through my device. I'm stumped. Any/all suggestions welcome!
Please post your simpleusb.conf and rpt.conf node stanza. It's likely duplex is set wrong somewhere if the alignment tones work. 73s -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net