Jim, chan_usbradio does have the ability stop squelch crashes when using hardwared COS/CTCSS signaling by applying an audio delay and chopping off a selected number of ms of trailing audio after COS/CTCSS drops. Try these changes in usbradio.conf: [usb] carrierfrom=usb ; could be usbinvert ctcssfrom=no rxdemod=flat ; input type from radio -- *must* be set to *flat* rxsquelchdelay=150 ; Number of milliseconds to "chop" Have fun -- I hope this helps! 73, David KB4FXC On Sun, 6 Oct 2013, Jim W7RY wrote:
Spifically, when I use COR from the radio, I have a squelch crash when a user unkeys. If I use squelch=dsp, then the crash is not there. But, the squelch action of the node receiver is not the best. I would really like to use COR but dislike the squelch burst. Is there a way to delay the audio and shut it off before the squelch closes? Like in a audio delay board for a repeater controller?
Thanks for info that you could pass along.
73 Jim W7RY
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users