see this page https://allstarlink.org/usbradio.html On Sun, Jan 18, 2015 at 3:18 PM, Cole Cunningham <colecaz@gmail.com> wrote:
Doug,
I have interfaced a radio to a FOB and am able to get all functions working except txaudio.
When trying to adjust it using the radio tune command it gives be back
Garage3*CLI> radio tune rxnoise 41189
Device usb currently not active
[
The just the radio tune gives
Garage3*CLI> radio tune
Active radio interface is [usb]
Device String is
Card is -1
Output A is currently set to composite.
Output B is currently set to off.
Tx Voice Level currently set to 500
Tx Tone Level currently set to 200
Rx Squelch currently set to 725
Usage: radio tune <function>
rxnoise
rxvoice
rxtone
rxsquelch [newsetting]
txvoice [newsetting]
txtone [newsetting]
auxvoice [newsetting]
save (settings to tuning file)
load (tuning settings from EEPROM)
All [newsetting]'s are values 0-999
The instructions on the docs.allstarling.org about adjusting radio parameters seem to refer only to the URI.
Can you tell me the way to change the active device so that I can adjust and save the parameters and make the same usb port attach to the same node number every time?
Thanks,
Cole
AA7RD
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.