Is there anyone that can help me my node wont start keeps give me the following issues [Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 [Jun 11 23:47:55] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169 [Jun 11 23:47:55] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28169 [Jun 11 23:47:55] WARNING[6133] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:55] WARNING[6134] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:55] WARNING[6136] chan_usbradio.c: Loaded parameters from usbradio_tune_usb28169.conf for device usb28169 . [Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 [Jun 11 23:47:57] NOTICE[6101] app_rpt.c: RPT thread restarted on 28169 [Jun 11 23:47:57] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28169 [Jun 11 23:47:57] WARNING[6152] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:57] WARNING[6153] channel.c: No channel type registered for 'Zap' [Jun 11 23:47:59] NOTICE[6101] app_rpt.c: RPT thread restarted on 28168 [Jun 11 23:47:59] WARNING[6101] app_rpt.c: rpt_thread restarted on node 28168 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:52] ERROR[6124] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: 1. You only have to compile Zaptel support into Asterisk if you need it. One option is to recompile without Zaptel support. 2. You only have to load Zaptel drivers if you want to take advantage of Zaptel services. One option is to unload zaptel modules if you don't need them . 3. If you need Zaptel services, you must correctly configure Zaptel. [Jun 10 23:29:53] ERROR[6131] asterisk.c: Asterisk has detected a problem with y our Zaptel configuration and will shutdown for your protection. You have option s: Anyone have any ideas???? Just started out of the blue