Hi Steve, Thanks for the help! I'm just about there now, I think! I added the config statements you suggested and now I can key the remote base via '*9' and unkey via '#'.....But this seems a bit flakey--I can get the remote base keyed, but, it doesn't always unkey..Also, VOX mode still doesn't want to work. Some other observations are: I noticed that if I use simple mode, once the remote base is keyed it won't unkey....Not really an issue to me, but, an observation. And, function *7 (link status) causes a seg fault--should that happen? Please note as I mentioned earlier that VOX, etc., works fine on the repeater node (#21), interestingly.... Here are my current configs: rpt.conf -------- [22] ; Change this to your assigned node number rxchannel = Radio/usb1 ; Rx audio/signalling channel duplex=0 remote=y functions = functions_remote phone_functions = functions_remote authlevel = 0 ; should be set to 0 or left undefined. remote_inact_timeout = 0 remote_timeout = 0 remote_timeout_warning = 0 remote_timeout_warning_freq = 0 voxtimeout=5000 ; time to let vox talk in ms voxrecover=500 ; time to take from vox one timed out in ms simplexpatchdelay=10 ; # of 20 ms frames to delay audio simplexphonedelay=10 ; # of 20 ms frames to delay audio [functions_remote] 7=ilink,5 ; Link status 8=status,2 ; Time 9=cop,6 ; Phone TX key extensions.conf ---------------- [radio-control] exten=22,1,Answer exten=22,n,Playback,rpt/node exten=22,n,Playback,digits/2 exten=22,n,Playback,digits/2 exten=22,n,Rpt,22|Pv On Thu, 9 Oct 2008 hwstar@rodgers.sdcoxmail.com wrote:
Do you have a functions_remote stanza and is phone_functions pointing
to a remote_functions function table? Do you have a 98=cop,6 statement in the remote_functions stanza?
[functions_remote] . . . 98=cop,6
Finally, is authlevel set to 0 or undefined in the node stanza? If
authlevel is >0, you won't be able to key anything and 20 seconds later, you'll be disconnected!
[XXXX]
rxchannel = Zap/2 remote = ft897 functions = remote-functions phone_functions = remote-functions ; important! authlevel = 0; should be set to 0 or left undefined.
Steve WA6ZFT
From: David McGough <kb4fxc@inttek.net> Date: 2008/10/09 Thu AM 07:53:24 PDT To: app_rpt@lists.illiana.net Subject: [App_rpt] Dial-in access to remote base
Hi Everyone,
I'm having a problem using my remote base via dial-in access to asterisk and I'm trying to figure out how to fix it....
On my asterisk box, I'm controlling 3 nodes currently. The first (node #21) is a UHF repeater, and the second (node #22) and third (node #23) nodes are simplex VHF and HF remote base radios....All these nodes are working fine, etc.
The dial-in and autopatch functions work great with my repeater node (#21) ....But, for the remote base nodes, I can't key the rig from the SIP phone no matter what I try! I've tried all the phone modes: dumb, normal, simple and VOX mode from the extensions.conf. Nothing works.
Here is a snippet of my extensions.conf:
[radio-control] exten=21,1,Answer ; Works great! exten=21,n,Playback,rpt/node exten=21,n,Playback,digits/2 exten=21,n,Playback,digits/1 exten=21,n,Rpt,21|Pv
exten=22,1,Answer ; Can't key the remote base exten=22,n,Playback,rpt/node exten=22,n,Playback,digits/2 exten=22,n,Playback,digits/2 exten=22,n,Rpt,22|Pv
snippet of rpt.conf:
[22] rxchannel = Radio/usb1 ; Rx audio/signalling channel duplex=0 remote=y remote_inact_timeout = 0 remote_timeout = 0 remote_timeout_warning = 0 remote_timeout_warning_freq = 0 voxtimeout=5000 ; time to let vox talk in ms voxrecover=500 ; time to take from vox one timed out in ms simplexpatchdelay=5 ; # of 20 ms frames to delay audio simplexphonedelay=5 ; # of 20 ms frames to delay audio
[nodes] 21 = radio@127.0.0.1/21,NONE 22 = radio@127.0.0.1/22,NONE,y 23 = radio@127.0.0.1/23,NONE,y
Thanks in advance!
73, David KB4FXC
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt